TS1

1. Vlan 12 allowed on trunk on SW2 and no passive int on OSPF
2. PPP incorrect password on R17, did not add net 145.67.89.20/30 on R12
3. R22 passive interface e0/0
4. No BGP session between R4 & R5, weird route-map names, and some different from spoto
only metric cost for prefixes 123 and 134. In my case i modified prefix 134 on R6
I added ip prefix-list 194 seq 10 on R21
5. Passive interface e0/0 on R14
Remove eigrp weight on R13
6. Only added IPv6 phone network
7. Restiction to only do 2 corrections: 1) R19 add permit esp any any on ACL
2) add ip nhrp nhs on R18
Note: On R15 had redistribute bgp with metric 1 1 1 1 1 i left that command due restriction
8. Same restriction to only modified 2 things: 1) add ip nat inside on R8 int e1/0.23
2) R7/R8 has no default-info originate and trace from R104 did not work until command added on R7
I asked proctor if i need to consider to enable backup link and she told me: No, just main backup so i left ticket with
only these 2 changes
9. Incorrect crypto address on R7 (Had something like 192.x.x.x). I noticed on Tunnel10: tunn sour 172.x.x.x. instead the interface alias
10. Added on R21/R23 ip dns server and ip http server on NAS

DIAG H2+ exactly same as spoto (seq #227 for ipv6 frame)

CFG H1+ exactly same as spoto (only noticed the missing sentence "make sure R1 wont be a transit router of the traffics R1 is not source or destination"

TS1
1.Create vlan 12, add vlan 12 to trunk port e0/0
2.PPP. Change local pool name in iface s4/0 on R12
3.OSPF. Delete passive iface in R22
4.EIGRP. Change K weight in R13, add deny host 145.14.14.14 to acl on R12 for offset-list
5.BGP. Change route-map MED value in R22 for prefix 194.1.0.0/16
6.IPv6, add network eth0/0 to bgp in R25
7.DMVPN. Add esp any any to acl in R19, ip nhrp reditect R15, delete redistribute connected on R15, ip nhrp nhs on R18
8.MPLS. Default-information originate on R7, ip nat outside e0/0.125, ospf cost 1000 in R4, R6.
9.DMVPN NAT. Change key address on R7 to 0.0.0.0
10.NAS. Enable dns server on R23, change nat conf
DIAG+++.
All same.. Server ip 10.0.2.2
CONF H2+
All same to spoto solutions